STIHL MS 361 Chainsaw

Stihl MS 361 Outstanding power-to-weight ratio, state-of-the-art technology, exceptional cutting speed and torque. Equipped as standard with STIHL's vibration-damping RSC chain. Lowest vibration level in its class.

• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive STIHL feature. It is a starter handle with a built-in shock absorber that helps reduce effort and make starting easier. ElastoStart™ noticeably reduces the sudden peak forces (compression) that are usually felt when starting. The forces that occur after the first compression stroke when pressing are eliminated.
• Ematic™ Oiling System - The Ematic™ cutting blade, when used with a STIHL OILOMATIC® chain, provides proper lubrication and uses less oil than conventional methods. The system works because two strategically placed ramps on the cutting blade help maintain the oil flow and direct oil to the guide bar and chain, as well as to the chain’s attachment points, which in turn reduces oil consumption by up to 50%.
• Controlled-delivery oil pump - Different blade lengths, wood types and cutting techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select the right amount of oil for the job.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ compensating carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially blocked, maintaining the correct engine RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and fuel flow. When the air filter becomes dirty and less air is available to the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the reduced air flow. This is different from typical carburetors that use this air from the “dirty” side of the airbox.
• Anti-Vibration System - STIHL has developed a system to reduce the vibration level of handheld outdoor power tools. The STIHL Anti-Vibration System helps reduce operator fatigue and provides a more comfortable working experience.
• Carburetor heating (V) - When switching the chainsaw from summer to winter operation, the incoming air is preheated by the engine fins. This ensures that the carburetor does not freeze and you can continue working even in freezing temperatures.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use control lever that operates the choke, start throttle lockout, and on-off switch. The operator must pull up on the throttle trigger before moving the lever to the choke position.
• Advanced combustion technology - Four exhaust channels swirl the fuel-air mixture before ignition, ensuring optimal combustion and high-efficiency operation. The result is low fuel consumption and high rpm over a wide range.
• Tool-free fuel and oil caps with retainers - simply lift the lever and twist the caps to remove or tighten. No need to use a tool to tighten or loosen.
• Decompression valve - is part of the easy start system. The valve should be pressed before starting to reduce the compression pressure during starting, as well as  to reduce the effort required for the cranking rope.
• Side chain tensioner - This feature makes it much more convenient for the user to adjust the chain with a bar end wrench.

Equipment

• Chainsaw MS 361
• 50 cm long Rollomatic E
• Cutting chain 3/8" - 72 teeth
• Clamp/removable wrench
• Passport/Instruction (MANUAL)
• Warranty

You will need a chainsaw to work.

• Fuel (minimum octane 90) Premium <91 - 94>
• STIHL HP 2-Stroke Engine Oil
• STIHL ForestPlus chainsaw oil

------------------------------------------------------------------------------

The chainsaw can be fitted with the following bar lengths:

• 40 cm - 60 teeth - 3/8" - 1.6 mm
• 45 cm - 66 teeth - 3/8" - 1.6 mm 
• 50 cm - 72 teeth - 3/8" - 1.6 mm (set)
• 55 cm - 76 teeth - 3/8" - 1.6 mm
• 63 cm - 84 teeth - 3/8" - 1.6 mm