PIWS 10-20V Impact wrench

Product Description

MUCH POWER TO FULFILL HIGH STANDARDS

The PIWS 10-20V cordless impact driver with ½ '' (12.7 mm) external square tool holder and automatic impact mechanism is the powerful profile solution for the powerful screwing in / out and tightening / loosening of nuts

Maximum control due to pre-selectable torque levels

Screws and nuts can not be too loose also not too tight to avoid damages to the threads. Thanks to its preselectable 4-step torque of PIWS 10-20V an over-tightening can reliably be avoided. Select your desired torque level at the touch of a button from 100 Nm, 200 Nm, 300 Nm or even 400 Nm. The torque can be infinitely set with the on/off switch up to the preset maximum value. The different torque levels can be clearly read even in the dark on the LED indicator integrated in the rechargeable battery shaft. Even stuck, canted or rusted screw connections can be loosened by the cordless impact wrench PIWS 10-20V with pulsating rotational movements of the impact mechanism of up to 3,000 min-1. By simply pressing the integrated right/left switch, the tool doesn't need to be removed in order to tighten and loosen the screw and nuts.

High battery capacity and long durability

With its powerful and particularly durable 20V / 4Ah-Flexpower-Multiakku (Li-Ion) the PIWS 10-20V is recommended for screwing / assembly work in wood and metal throughout the house, for repair work on the car, motorcycle and bicycle or for the professional use in workshops. To make sure that you can start immediately, a matching set of sockets in the most common sizes (widths: 17, 19, 21, 23 mm) is already included

CHANGING TIRES LIKE PROFESSIONALS

Changing summer or winter tires on your car with the good old wheel wrench is exhausting and time-consuming. Also when repairing motorcycle, engine or gearbox, the screws and nuts must be permanently tightened or loosend properly. With the battery-powered PIWS 10-20V you can literally master all this work in the blink of an eye and as quickly and easily as in motorsport - but without compressed air hose or disruptive cable.

Practical tip: Annoying flat tires are now over thanks to PIWS 10-20 V. With the compact cordless impact wrench in your trunk the spare wheel can be mounted at lightning speed even at dusk or at night. The integrated LED work light ensures optimal illumination of the work area. Feel safe: once charged, the Flexpower multi-battery delivers the full load capacity even when not in use for a long time.

Keyword torque: The torque of a rotary impact wrench is a safety factor when changing the wheel. Depending on the rim and vehicle type, the torque may vary. Please consult with your vehicle or rim manufacturer about the recommended value. With 4 selectable torque levels from 100 to 400 Nm, the PIWS 10-20V delivers enough power for every vehicle and tire combination. A socket set, suitable for the most common wheel bolts, is already included with the device. For rim locks, a suitable adapter may be required.

QUALITY & PERFORMANCE – YOU HAVE IT IN YOUR HAND

By using weight-reducing materials in the glass-fiber reinforced plastic housing and a lightweight die-cast aluminum housing, the 2.500 g PIWS 10-20V can be used effortlessly, even when working long hours. The softgrip inserts embedded in the device handle ensure an always secure grip at work. Also screwing in large, long screws is effortless due to the special impact mechanism of the PIWS 10-20V protects the wrist from the occurring rotational forces. For maximum work safety, the device is also equipped with a quick-stop brake and switch-on lock to prevent inadvertent activation of the rotary wrench.

The cordless impact wrench is supplied with a Trotec-compatible 20 Volt Flexpower multi-battery (4.0 Ah battery capacity), a 1.5h quick charger with automatic charge cut-off including a 4-pin socket set. Also included is a handy belt clip for right- or left-side mounting on the device handle of the rotary impact wrench. An indispensable helper, for example when working on the ladder or at changing workstations. For perfect order, the entire set is delivered in a sturdy carrying case.

Simply use your existing sockets or screwdriver bits. The tool holder of the PIWS 10-20V allows the use of all standard ½" square socket wrenches. The change of the caps requires no additional tool, the attached socket locks independently. With a bit adapter* (½' ' square to ¼" hex) ¼' ' hex bits – such as Trotec's 32-piece accessory bit set – can be used with the PIWS 10-20 V rotary impact wrench
* Not included in the scope of delivery.
 

DOUBLE ENDURANCE WITH THE FLEXPOWER-MULTI BATTERY 20V/4AH

The lithium-ion battery of the PIWS 10-20V without self-discharge and memory effect is a real powerhouse. If 20 volts / 2 Ah power is not enough, you can benefit from this premium battery in addition to much longer endurance.

100 % more performance than a 2 Ah battery

Compared to a 2 Ah battery, the charging capacity of 4 amp hours allows a device to last twice as long. It always provides the full power of the battery without it becoming weaker towards the end. So much power and stamina convince in practice and you simply get a lot more done!

Fully charged in only 90 minutes

The 3-level capacity indicator in the battery housing indicates the state of charge at the touch of a button, even if the battery is not connected to the device. Charging is quick as well: a fully discharged battery is 100% ready for use after only 90 minutes with the included quick charger.

Compatible with Flexpower system

The Flexpower Multi-Battery 20V / 4Ah is compatible with other power tools from Trotec. In addition to even more PowerTools from Trotec in the future this battery fits to other tools such as work lamp PWLS 10-20V. If you already own a Flexpower multi battery 20V with 2 Ah, you can also connect it to the rotary impact wrench PIWS 10-20V. So you have a replacement battery at hand for all cases.

Premium branded battery for permanent full power

Lithium-ion batteries are now widespread, after all, there is no memory effect or self-discharge, and these batteries can be taken at any time from the charger and used without it harm the battery. But under the generic term "lithium-ion" batteries are sold with a wide variety of qualities and electrode materials, even those that weaken noticeably in performance with increasing discharge.

In the case of lithium-ion batteries from Trotec, we can guarantee you, without exception, the supply of high-quality premium branded batteries of the type NMC with high energy density and charging voltage right up to the end. That is why our premium branded batteries, unlike conventional lithium-ion batteries, do not show any decrease in performance even with increasing discharge.

So you benefit from permanent maximum power, even if the battery is almost completely empty. As time progresses, only the charge level drops, but never the power - that's your added value with premium branded batteries from Trotec!

Brand quality plus price advantage

Reliable, powerful and suitable for the most difficult applications: these are the quality features of Trotec cordless impact wrenches. Thanks to their power, they are even able to cope with extreme demands. High performance for demanding applications, because Trotec stands for brand quality and professional solutions with an excellent price-performance ratio!

BENEFITS IN PRACTICE:

• 20V lithium-ion battery without memory effect and without self-discharge
• Flexpower multi-battery 20 V 4.0 Ah - flexibly combinable with other 20 V cordless tools
• Powerful rotary impact function for screwing in and loosening screws and nuts
• Robust aluminum die-cast gearbox housing for optimum heat dissipation and durability
• Suitable for tire changes thanks to high torque
• 5 torque settings plus automatic activation of the impact mechanism (when tightening and loosening)
• Robust ½"-external square drive
• Stepless speed control with Quickstop
• Special impact mechanism protects wrist from torque - ideal for effortless screwing in of large, long screws
• Build in LED work lights
• Fast charger with automatic charge switch off: only 1.5 hours charging time
• Three-level battery capacity indicator integrated in the battery
• Convenient right-left run switching and switch-on lock
• Rubberized softgrip inserts in the case for extra good grip
• Mountable belt clip facilitates quick access and transportation
• Including 4 sockets for the common sizes 17, 19, 21, 23 mm